RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
The DR8001 hybrid transceiver module is ideal for short-range wireless data applications where
robust operation, small size, low power consumption and low cost are required. The DR8001 utilizes
RFM’s TR8001 amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend
of characteristics. All critical RF functions are contained in the hybrid, simplifying and speeding
design-in. The receiver section of the DR8001 is sensitive and stable. A wide dynamic range log
detector, in combination with digital AGC and a compound data slicer, provide robust performance
in the presence of on-channel interference or noise. Two stages of SAW filtering provide
excellent receiver out-of-band rejection. The transmitter includes provisions for both on-off keyed
(OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to
suppress output harmonics, facilitating compliance with ETSI I-ETS 300 220 and similar regulations.
The DR8001-DK kit allows for full demonstration or development of the third-generation (3G) TR8001 Virtual Wire
device. The kit provides “Out of the box” operation with or without the accompanying software. 2-way Range Test
capability is included by simply snapping on the included 9V battery, turn on power, and configuring the opposite
board for transmit. A small area is available for custom development with other popular microprocessors. The
DR8001 Data Radio boards are configured to operate at a data rate of 4.8 kbps. The kits are shipped with a pair of
data radio boards and matching antennas. Data Radio boards with antennas can be purchased separately for
development of applications.
Kit Includes:
• 2x USB 2.0 Cables
• 2x 9V batteries
• VWO Configuration software
• 2x tuned, SMA antennas
• 2x DR development boards
• CD with documentation
The DR8001-EV hybrid transceiver module is ideal for short-range wireless data applications
where robust operation, small size, low power consumption and low cost are required. The
DR8001-EV utilizes RFM’s TR8001 amplifier-sequenced hybrid (ASH) architecture to achieve this
unique blend of characteristics. All critical RF functions are contained in the hybrid, simplifying
and speeding design-in. The receiver section of the DR8001-EV is sensitive and stable. A wide
dynamic range log detector, in combination with digital AGC and a compound data slicer, provide
robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering
provide excellent receiver out-of-band rejection. The transmitter includes provisions for
both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs
SAW filtering to suppress output harmonics, facilitating compliance with ETSI I-ETS 300 220 and
similar regulations.
Click to Download
download
data sheet
Rev Date 07/11/07
