RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
The TR7000 hybrid transceiver is ideal for short-range wireless data applications where robust
operation, small size, low power consumption and low cost are required. The TR7000 employs
RFM’s amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics.
All critical RF functions are contained in the hybrid, simplifying and speeding design-in.
The receiver section of the TR7000 is sensitive and stable. A wide dynamic range log detector,
in combination with digital AGC and a compound data slicer, provide robust performance in the
presence of on-channel interference or noise. Two stages of SAW filtering provide excellent receiver
out-of-band rejection. The transmitter includes provisions for both on-off keyed (OOK) and
amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to suppress output
harmonics, facilitating compliance with FCC/ETSI I-ETS 300 220 and similar regulations
The DR7000-DK kit allows for full demonstration or development of the third-generation (3G) TR7000 Virtual Wire
device. The kit provides “Out of the box” operation with or without the accompanying software. 2-way Range Test
capability is included by simply snapping on the included 9V battery, turn on power, and configuring the opposite
board for transmit. A small area is available for custom development with other popular microprocessors. The
DR7000 Data Radio boards are configured to operate at a data rate of 4.8 kbps. The kits are shipped with a pair of
data radio boards and matching antennas. Data Radio boards with antennas can be purchased separately for
development of applications.
Kit Includes:
• 2x USB 2.0 Cables
• 2x 9V batteries
• VWO Configuration software
• 2x tuned, SMA antennas
• 2x DR development boards
• CD with documentation
The DR7000-EV hybrid transceiver module is ideal for short-range wireless data applications
where robust operation, small size, low power consumption and low cost are required. The
DR7000-EVDR7000-EV utilizes RFM’s TR7000 amplifier-sequenced hybrid (ASH) architecture to
achieve this unique blend of characteristics. All critical RF functions are contained in the hybrid,
simplifying and speeding design-in. The receiver section of the DR7000-EV is sensitive and stable.
A wide dynamic range log detector, in combination with digital AGC and a compound data
slicer, provide robust performance in the presence of on-channel interference or noise. Two stages
of SAW filtering provide excellent receiver out-of-band rejection. The transmitter includes provisions
for both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter
employs SAW filtering to suppress output harmonics, facilitating compliance with ETSI I-ETS 300
220 and similar regulations.
The DR7000 hybrid transceiver module is ideal for short-range wireless data applications where robust
operation, small size, low power consumption and low cost are required. The DR7000 utilizes RFM’s TR7000
amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. All critical RF
functions are contained in the hybrid, simplifying and speeding design-in. The receiver section of the DR7000
is sensitive and stable. A wide dynamic range log detector, in combination with digital AGC and a compound
data slicer, provide robust performance in the presence of on-channel interference or noise. Two stages of
SAW filtering provide excellent receiver out-of-band rejection. The transmitter includes provisions for both onoff
keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to
suppress output harmonics, facilitating compliance with FCC/ETSI I-ETS 300 220 and similar regulations.
Click to Download
download
data sheet
Rev Date 11/06/07
